Showing posts with label artisan guild fighters guild. Show all posts
Showing posts with label artisan guild fighters guild. Show all posts

2023/09/03

A thing a week 2023, week 36

This week we have another mini-theme of Artisan Guild Fighters Guild (plus one). All of these are 3d prints and they're all mostly OK which for my old printer, is pretty amazing (note: it's been broken a while). I printed these in the fall of last year and have only now (well, several weeks ago) gotten around to painting them.

From left to right we have Fighter A Male, Fighter D Lady, Brent of Goobertown, Fighter C Lady. As much armor as these folks have, I don't know why I didn't airbrush them in armor colors. I mean, I did one just like that last year and from the same set. Overall, they've probably got a few too many details but I forgive that because they also have nice dynamic poses and expressive faces. Fighter A has a Obi Wan thing going on which I like. Lady D's mascara is probably a little too heavy. I recall having a really hard time with it. Lady C had a punk rock thing going on so I painted her hair a fun color. To save time, it's the same color as her cloak and whatever she's got at her waist. Brent, if you didn't know, is a youtuber and he shows up a lot in the 3d printing world. His tuft is because I failed to glue the rock down properly and needed to hide gap after missing it with the texture paste. None of these are great paint jobs, each clocking in at around the four hour mark but they're good figs and I'll probably print/paint them again. 

This is Sigfrido Dragonsbane Fighters Guild Hero. He's a pretty complex sculpt and I didn't decide to take him to this level until I was most of the way through painting. Seemed right, you know? I was pretty sure I took the highlights on his cloak higher than it looks in these photos and I didn't realize that the shadows were quite so shiny. I spent a bunch of extra time highlighting and shadowing his armor but none of that is showing up here, sadly. The edge highlighting does, however, and that's good because it took a lot of time. He'll count as a high quality fig for the year.

Last up we have Morgana the Ascended Fighters Guild Hero and she will also count as a high quality fig. I spent a lot of time on her face and not enough time on the fire effect on her hammer of burninating, her hair, and her cloak as is evidenced in the turnaround. It all reads a lot better in person and in retrospect, I I had known I was going to paint her to this level, I would have painted her in sub-assemblies. Lord willin' and the creek don't rise, her winged version will be making a special guest appearance to a printer near me in the future.

2023 finished mini counter: 197/104, high quality: 9/10



2023/06/11

A thing a week 2023, week 24

Still in mini-land this week but no real theme beyond "stuff I had on my painting table."

First up we have Romud, Cleric from Crippled God Foundry. He has a General Kenobi thing going on, probably intentionally. I like that he's got an action-y pose but don't like the amount of negative space on him. He's a nice chunky model, otherwise, and aside from his shield being too fiddly to paint, I'd say it's a solid B sculpt. I put extra effort into his hair even though it doesn't show and notably didn't start with the normal low fleshtone that I usually used. Instead, I mixed the shadow color and lightened with the light fleshtone I usually use as a highlight. Not much to say beyond that, so let's move on.

Next up we have Dwarf Female from Galaad Miniatures, one of my favorite sculptors. I wasn't entirely sure what to do with the skull looking thing on her shoulder so I decided it was metal. I also didn't realize how shiny the dark tones on her cloak were. I didn't spend a ton of time on this paint job and it shows. Her face is OK since that's where the bulk of the time went but everything else is weak. Even the base is weak and one of the many I built at the beginning of the pandemic. If I've got a recommendation for anyone who hand builds bases: it's super convenient to have a bunch in waiting. 

This guy is Glavier from the Chainmail Starter Pack. His pack-mates have shown up here a few times over the years and like them this guy is metal. I didn't super get the moldlines sorted but I got close enough to not be unhappy with it. What I am unhappy with is the size of his weapon (a stupid fantasy version of an actual weapon) and his armor (a stupid fantasy take on actual armor). I get that artists aren't historians usually. On the other hand, I really feel like we'd have better art if we thought just a tiny bit about how the armor would function if it were real.

Last up this week we have questionably-named Lady D Mace & Shield from Artisan Guild's Fighters Guild. This set is great not only because they're well-sculpted, but also because they're modular. Even though I really like their work, these sculpts have probably too many details. In particular there are too many belts, buckles, and armor filigrees. While not quite as eggregiously fantasy as our pal the Glavier, it's still pretty fantasy. I painted her hair the same way I did last week's Elf Bandit and while it pops on the table, I don't think it looks good close-up. Probably the highlights need to be tighter with darker tones elsewhere. Overall, I think this is a good result in four or five hours. 

2023 finished mini counter: 116/104

2022/12/25

A thing a week 2022, week 52

We're going to round out 2022 with a bang and on Christmas Day no less. There's a lot of stuff to go through as we clear out the bow wave I've been pushing since the fall as per usual.

These five dudes are Bones 5 Hobgoblins. They were a speed paint done over a few days from the typical scheme. Prime->Zenithal->basecoats->highlights with the notable inclusion of an oil wash. Every time I use an oil wash I'm surprised at a) how messy they are, and b) how goshdarned good figs look after it. I may do a lot more of these in the not-so-distant future. Ultimately, these guys probably warranted a better paint job than I did since they're such good sculpts. They weighed in at around an hour and change per fig. While I'm not entirely satisfied with them, I'm fairly happy with the result.

I think this is Fighter Guild Male E from Artisan's Guild and found somewhere in this collection. As this guy is mostly armor and because I've wanted to use my airbrush more, he's unsurprisingly mostly airbrushed. The zenithal is basically a metallic and I only vaguely recall not using my favorite Vallejo Metal Colors for what I assume is a good reason. His cloak is a lot less smooth than I'd like but he was completed in around 3 hours over a couple of evenings because I was lazy. This fig will hold a better quality paint job so possibly he'll show up again in the future, possibly with a different weapon.

Next up we have Bril Le Ante, the mounted version. I should have pinned this guy since the Bril part was so freakin' hard to paint as opposed to the horse part. He's a vintage metal fig and the mounted version showed up here way back in week 39 of 2020 which feels like another world. He was also painted over a couple days and for the same reason. There's something distinctly different about vintage hand-sculpted figures, their smaller stature notwithstanding. I like this guy and if I was ever going to repaint a fig, this guy would be high on that list.

These next two are an exercise in persistence. He is RAFM Bard (Male) and she is RAFM Elf Ranger (Female). A couple years ago I spent a big chunk of time identifying what I thought was all of my vintage figures. Having painted these two firmly glued to their bases, I couldn't find any evidence of this and in the initial writing of this post, I decided to take one last look and guessed at the manufacturer. I lucked out and within a couple minutes had the above links. The paint jobs themselves are nothing special. He stuck around on my painting desk for most of the year picking up whatever extra paint I had in the right colors if I finished a thing up early. She was done as a speed paint over a couple days of doing other things. The story is good and the figs are painted.

This is a 3d printed Orc Blacksmith from Vae Victis. It's a mostly good sculpt full of character like a lot of their figs. There are some really annoying negative spaces, though, like between her feet and the stump, and between her left arm and her body. I also wish that some of the details were a little sharper, particularly, the straps and belts, pouches, and other tools. Possible that my printer did a bad there and you can see that the end of her hammer is missing due to a failed support--this printer does that a lot. This was otherwise a fairly enjoyable speed paint in a couple hours. This fig can probably support a better paint job so probably I'll flip her around and do a lefty version sometime in the future.

We end the year with a batch of ten skellingtons from Runeforge Skeletal Army campaign. I am a sucker for a good deal and this campaign was definitely that. I don't use a ton of undead in my campaigns usually but when I do, I need a lot of them and the samples shown in the campaign looked really good. I printed these ten out this summer in an attempt to bring my cost per fig down some (yes, I track this stuff) and they'd been bumping around since then half prepped. Well, this was the week to finish them. They're a speed paint (obviously) to the tune of about six hours for all ten. I started with a fairly run of the mill slap chop like the cool kids are doing these days but hit up additional details and washes and rust and crap after that. For reasons I don't understand every fig from my first bottle of resin is extremely brittle but everything I've printed after that have been much more durable. Overall, they aren't winning any awards but hopefully they'll terrorize my player characters sometime soon.

2022 finished mini counter: 260/100